== Key Features ==

* An ultra micro that's ideal for indoor 3D flight
* Completely built and flight ready—just bind to any DSM2™ aircraft transmitter with dual rates and expo
* Includes a Li-Po flight battery and DC Li-Po charger
* Small and light enough for experienced pilots to fly almost anywhere indoors

== Overview ==

The Ultra Micro eXtreme (UMX) Extra 300 3D makes the dream of a 3D plane you can fly almost anywhere a reality. With a flying weight of barely over an ounce (just 33 grams) battery and all it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room. Its ingenious laser-cut foam airframe designed by ETOC champ Seth Arnold makes it all possible.

The structure uses a fraction of the foam material usually used in profile planes of this type and is covered with micro-thin film. The airframe is reinforced with carbon fiber rods that keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision. Optional Side Force Generators are also included. These razor-thin pieces of foam slide onto the leading edge of the wing and enhance rudder authority in knife-edge flight. They improve tracking during precision aerobatics too.

The UMX™ Extra 300 3D BNF comes completely assembled with a punchy 8.5mm coreless brushed motor and Spektrum™ AR6400L Ultra Micro DSM2 Receiver/ESC installed. Built-in long-throw servos on the AR6400L drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 1S 3.7V 150mAh Li-Po battery and DC Li-Po charger are also included. For best performance a DSM2 aircraft transmitter with dual rates and expo is recommended.

== Needed to Complete ==

A 4+ Channel DSM2 compatible Transmitter. A programmable transmitter capable of dual rates and exponential is highly recommended.

== Specs ==

* Wingspan: 16.8 in (427mm)
* Overall Length: 19.4 in (494mm)
* Wing Area: 74 sq in (4.8 sq dm)
* Flying Weight: 1.2 oz (32.5g)
* Motor Size: 8.5mm Coreless Brushed
* Trim Scheme Colors: Red Grey Clear Black
* Prop Size: 130mm x 70mm
* Recommended Battery: 3.7V 1-Cell 150mAh LiPo
* Approx. Flying Duration: 4-8 minutes
* Scale: Ultra Micro
* Minimum Age Recommendation: 14 years
* Experience Level: Advanced
* Recommended Environment: Indoor/Outdoor
* Assembly Time: Less than 1 Hour
* Is Assembly Required: No

== Needed to Complete ==

A 4+ Channel DSM2 compatible Transmitter. A programmable transmitter capable of dual rates and exponential is highly recommended.

E-Flite

Part EFLU1080